Honestly, with Apple making it incredibly fucking hard to take out their batteries with excessive amounts of glue, I’m okay with this.
Do they not have the tabs you can pull out anymore?
They do, but they’re incredibly prone to breaking when you pull and sometimes they’re just hard as shit to grip so you have to use a screwdriver to twist and pull.
I don’t think I need to explain why that’s so dangerous.
As someone who has changed hundreds of iphone batteries, the adhesive sucks. At least they changed to a different adhesive around iphone 8 because alcohol does wonders on it. I don’t even attempt to pull the tabs on those anymore.
May I ask how you do that? Do you just…douse the battery in alcohol? There isn’t much of a gap between the adhesive and the battery in my experience, so it just sits inside the chasis and rolls around. I haven’t had any luck with that but I’m probably doing it wrong.
I drizzle some in the corner and then use a sturdy tool to gently pry up on the battery to allow the alcohol to get deeper under. Since the adhesive patches are small to fit around the wireless charging coil, it doesn’t take much. Once you get one side of the battery loose the other will easily come with it, especially if the alcohol got to them.
Fingers crossed that this will be implemented well, im tired of having sleek electronics be irrelevant in 2 years when the silicon could go for 5 or six
The silicon could go on for decades if both the modem and processor were fully documented hardware that the community can access and support in the Linux kernel.
I can run a secure and current form of Linux on 30+ year old hardware if I want to, because the hardware documentation was expected by everyone at the time even if some end users were oblivious to what this meant. The whole reason google pushes Android is because they provide a base Linux kernel that hardware manufacturers can easily slip their proprietary junk into without requiring them to add the kind of open source code needed for mainline kernel support by the community. This is the mechanism that depreciates your device. It is totally artificial and an end user exploitation by design.
It’s usually not silicon on the PCB that fails, but the other electronic components (usually the capacitors) that fails first, and since they are surface mounted devices it’s really difficult to solder them by hand.
Nice, good to know! And you were awesome in the Suicide Squad series
Thank you! Go see “Barbie” in theater too!
There are no electrolytics in phones, and most newer phones don’t even have tantalums. So long as there are no flexing stresses induced, which is nearly impossible with the way phones are constructed now, the all MLC capacitors construction has the potential to outlast any PC motherboard or laptop by a large margin.
The most critical issue is board connectors and moisture ingress. The USB-C connector or any other high pin density micro sized connector with a tiny pin pitch, and large electrical potential will fail from charge cycling and a resistance forming between pins. USB-C is particularly bad because reversing the connector doubles the number of pins on the board in a ridiculous amount of space. Just using a standard USB-C connector when ordering a prototype to be fabed at any common board house will double the price. The USB-C pin pitch is too tight for the most common fab process resolution.
The pin pitch only matters for high power application to prevent arcing, and that can also be resolved through the most modern USB-PD standard (See: USB-PD Extended Power Range, which can support up to 240w), and the electrical adjustment you have to make are all on the device side.
I don’t know about the resistance forming between the pins, for low cycle applications the cheapest gold flash plating would easily last 10K plug cycles, and accounting for corrosion from hand sweat/oil/hand lotion, many companies favor going for thicker hard gold or platinum plating nowadays. (Rhodium is the absolute best, but it’s just too expensive now to do at scale because they are used in catalytic converters for electric cars). USB-C lasts for many more cycles than the Micro-USB standards before it (You can read the 4 axis and wrenching test standards for mechanical testing on the USB spec) so I’m not sure what you are talking about here.
Lab tests rarely reflect the real world. I’ve seen several issues with Pixels that had an issue with PD failing due to moisture, corrosion, and a bridge developing at the connector.
Actually, no, the lab tests are standard with all products of all large companies, and they are usually conducted in extreme conditions, like 100% moisture at 80-90C oven for 48 hours and highly concentrated salt spray kind of extreme.
You bring up the example of Google Pixel, yeah, because it’s Google, they are software people who think they can just cheap out on hardware and save a couple of cents by making it up in software. Look at the Nexus 5X and 6P, both devices had an absurd amount of quality control issues compared to the other products made by the manufacturers, and the only factor in common between them is Google.
Things change with time. The Pixel is now the most secure phone available due to its hardware encryption key verification system. It is the only phone that can run a verifiably secure bootloader and ROM on top of the same untrusted hardware situation found in all modern proprietary devices. Running a Pixel on Graphene OS is the most free and honestly liberating experience that has been available since the invention of capacitive touch technology made these handheld computers popular. The hardware build is on par with any similar device of the same price point, made in the same facilities as most devices.
Add to that requirements for longer software support. At least for security patches.
Hooray! Younger generations will finally be able to experience the joy of dropping their phone and having to pick up three to four different pieces! /s
(I’m all for this change, by the way)
Oh I remember that with Nokias. It’s like shock absorbing for cars lol.
I was 12, I think, when I got my first phone. A Nokia. I was mortified the first time it happened. Then clack-clack-clack I was taught to put it together again.
Happened many more times afterwards.
I was around the same age. :) I still have the old Nokias. What a time that was, with Symbian being an OS.
lego phone best phone
I was under the impression this is just stopping companies gluing batteries so the phones are repairable.
Are we going back to nokia style batteries?
Phones are getting more expensive so people are holding on to them longer, so it’s a nice quality of life improvement to remove the barriers to battery replacement so less people have to go down to a phone repair store to get it changed. The more of a hassle battery replacement is seen the more likely people are to just upgrade and create e-waste.
The problem here is that in order for most people to be able to replace the battery themselves safely they need to be really idiot proof. We’d need to return to back covers with latches or big screws and batteries in cases and contacts. This shit is bulky, heavy and hardly waterproof.
New iPhones use lipo pouch with a ZIF connector straight to the motherboard with a “pull to release” adhesive strip hidden under a panel with a single use sticky seal and two small screws. There is no black magic in replacing the battery yourself and the solution is small, lightweight and waterproof. However most people wouldn’t even know which way to turn the screws to loosen them and probably wouldn’t be bothered by throwing the phone away and getting the one with a better camera AI and more emojis.
Nah, the og motorola defy had removable battery, ip67 rating, expandable storage, and a headphone jack. It was a tiny phone and it was brilliant.
my first smartphone was an lg optimus s. that thing saw more toilet time than my butt. i lost track of how many times i dropped it in the toilet. it went in a lake a few times, also. it was a beast
@Know_not_Scotty_does @riodoro1 for some reason when I was 16 I really wanted the Defy Mini (XT320)
Though it wasn’t ever cheap enough for my allowance 🤣 probably for the best, my first android smartphone came a couple years later in the Vodafone Smart 4 Turbo. (snapdragon 410 version)
@riodoro1 @NightOwl I dunno, if you compare capacities of say, iPhone 14 Pro (12.38Wh) to Fairphone 4 (15.03Wh) and then the product dimensions of the two. There’s not a huge amount in it. Adding the 14 Pro Max (16.68Wh) for additional comparisons.
The Fairphone is 2.6mm thicker than the iPhones. (Yes the screen bezels are chonk too lol) But the fairphone is also making allowance to make every single component swappable, and has an IPS display (switching to OLED would save 1+ millimeter)
Yeah, I wish there was some advancements made when it came to trying to create swappable battery devices that retain water proofing. That area has just stalled since expensive disposable tech is more lucrative. Average person should just get a new one like you said as long as the process is still more difficult than changing a light bulb.
Yeah, I wish there was some advancements made when it came to trying to create swappable battery devices that retain water proofing.
If nothing else, regulations like the one described in here will do just that. So far the tech giants haven’t had any incentive to design sleek, waterproof devices with replaceable batteries. But you’ve gotta believe that if they’re required to have replaceable batteries, they’re not going to say “OK, back to chonky non-waterproof devices for us!”. They’re going to spend some of their R&D budgets to innovate ways that makes it more realistic to do all three.
The original Moto Defy got it right the first time with ip67 rated, removable battery, expandable storage, and a headphone jack. The next major improvement came with the xperia z(or z3) and they got waterproof charge ports and headphone jacks (no port plug required) but ditched the removable battery. Every other phone since seems to have stripped away some useful feature since. The new defy 2 is going to have satelite messaging but is huge and no removabpe battery or headphone jack iirc.
[edit: deleted, echo chamber here. Android good, Apple bad. Moving on and blocking this community, can’t have a reasonable conversation, just like reddit I guess].
The difference is that most of the people isn’t expected to own a mechanical watch, but having a smartphone is pretty much expected. You cannot treat a basic commodity as if it were a luxury item.
[edit: deleted, echo chamber here]
People disagreeing with you isn’t what an echo chamber is.
How is this an Android vs Apple thing? Most of the major manufacturers are making devices with the battery sealed in; they’ll all have to innovate ways of making them removable.
Excellent! Batteries in modern phones are surprisingly definitely removable and replaceable. I’ve done it multiple times. However, the unfriendly barrier to entry is glue and clips that require careful prying with spugers. It’s quite clear manufacturers are happy blocking you getting in; plenty people just buy new phones when the battery gets too old.
Worst was when the batteries were glued to the screen so you could break the entire phone apart trying to change it yourself.
See Pebble Classic
Man I loved that phone. WebOS felt so ahead of its time. Unfortunate hit to repairability though
spudger
I actually love all these regulations on smartphones (mainly by the EU), like the recent USB-C standard. That one in particular makes it so much easier to share chargers around the house!
As a USA citizen, thanks EU for making our cellphone companies not be dick’s.
USB-type C to become EU’s common charger by end of 2024
I mean… Sure, but we’ve had USB-C as de facto standard for many years now. When was the last time you saw a micro USB phone?
USB-C is standard for Android devices, but Apple devices still use lightning.
I know, but the person I was replying to made it sound like EU regulation is to thank for Android devices having USB-C
I don’t want to brag but my 5 yo phone is micro USB. B)
aa
Couldn’t agree more, two years ago I was gifted a small wireless speaker which works fine and everything but I sometimes even forget to charge it because its cable is a 15cm short USB-A to Micro-USB one which somehow is the only Micro-USB cable I have left at home as I didn’t have any other device with that port in years and I had thrown away a few cables when I last moved. Now whenever I am looking for a new electronic device USB-C is one of the first things I check and it’s a deal breaker for me.
Do y’all remember the days when you dropped your phone and it exploded into 3 or 4 pieces? 🤣 Those were the good days.
Three. Battery, cover and the rest. Weirdly, no damage to the plastic display. How? I guess it was the
weatherbezelAnd when you scratched up the back you bought a new one for $12. No $200 glass or machined aluminum cases that we put $35 covers on just to protect them from every day use.
Well, it was plastic. Pretty hard to crack plastic like glass
But it could get scratched
If this goes through, I think it would be really good news. Battery failure is one of the leading things that force people to replace their smartphones, and having them be replaceable would go a long way towards making smartphones last longer.
If the manufacturer wants to force you to upgrade they still can… they can stop making the battery that works with your phone model (and notch them to make sure they can’t fit).
Back in the day there were some manufacturers that made batteries that worked with several of their models, Nokia was one of them, but not all of them did.
Even Nokia had a deprecation cycle for battery models and when that happened you were stuck buying crappy Chinese copies.
But they are replaceable in that sense. You can take it back the the manufacturer or to one of those independent phone stores and they’ll swap out a battery for you.
I don’t think a user swappable battery is actually a feature most users need. Not when smartphones get over a day out of a charge, you can charge at home, work or in a car, and external batteries exist.
That’s where I have to disagree. Perhaps in your country you have lots of OEM repair stores but where I live we have none. Only 3rd party guys who are totally independent.
I had a LG V30 in mint condition but the battery was done. No one has that battery and no one is interested in getting it because LG sold so few devices here. You can’t even find cases for most phones, only Samsung phones or iPhone’s.
So I had to get a new phone.
This is very common in most of the world, especially the Developing countries.
What phone are you using? Both apple and Samsung have made their devices borderline impossible to swap the battery out. They will then charge you an arm and a leg for sometime that used to be an easy swap.
This is actually pretty crazy. Wonder how much it’ll affect the overall design of modern smartphones. Will we witness the return of flagships with plastic back covers?
God i hope so. I miss being able to just pop the back off and change out my battery. It was great for sd and sim card slots too. I am quite excited for this
I wouldn’t get too excited. I purchased a galaxy xcover 6 pro at launch. It is a recent device with a removeable plastic back cover with a gasket on it to preserve the IP68 rating, much in the same style as was popular up to the galaxy S5.
It seems like they forgot how to make that design work, because the first time I got caught in the rain it died an immediate and very hot death.
There are many other ways to carry out this design but they make the device a bit thicker which manufacturers are going to absolutely hate.
I couldn’t care less if the back cover is plastic, it’s just going inside a case anyway.
I would be comfortable to not use a case if it were plastic instead of glass.
That’d be awesome. I don’t understand why people think a glass back is premium. Your premium glass back doesn’t look so fancy when it’s shattered into a million pieces or sandwiched behind a $10 phone case from China.
I’ve hung on to my Note 4 that I bought in 2014 (no longer use it daily) and it’s still in one piece even though it never lived in a case. The plastic and aluminum body have plenty of battle scars but no cracks or functional damage. This MFer is almost 10 years old now on its 5th or 6th battery and still hanging in there despite its aged hardware. Now that is a premium design.
Yeesh I hope not.
I hope everything just becomes brushed aluminum ffs. I hate all these glass back phones
Phones only have glass backs to let wireless charging work so I don’t see aluminium making a come back any time soon.
Wireless charging isn’t all that needed IMO. It’s kind of old technology, my phone had it 10 years ago but none of my phones have had it since and I haven’t really missed it because USB C charging is fast enough where wireless charging isn’t really necessary.
It’s also a gimmick afaic, it’s not “Wireless” to me until it can charge contactless from a distance. This not-really-wireless wireless crap just moved the connection and made it magnetic instead of a plug. It’s a glorified magsafe lmao
Hell yeah, dont understand why people are big about this while it just contact charging. It doesnt even charge phone fast nor efficient. Funny people keep bragging about waste while they use inefficient charging method which waste more energy.
It’s inefficient, but it doesn’t depend on a finnicky-ass charging port so that’s nice.
When Apple goes USB-C on iPhones, I will unfortunately have to start using wireless charging, because USB-C ports are so annoying to clean compared to Lightning, I don’t plan on having a functional one after a year of owning a USB-C phone.
I’d never want to get rid of wired charging, but wireless is a really nice option. I’m never able to find a good angle/spot for my phone in my car with a wire sticking out of it. Even with a dashboard mount, I would prefer the mount itself be powered to avoid having the cable just hanging with the pull of gravity on it.
I hate wireless charging too, though. It’s inherently less efficient than wired, and you have less range of motion while charging. With a wire, I can still use my phone while it’s plugged in. Wireless charging needs to go away imo.
I’m pretty glad to have both options. I take your point about using it while charging, but I also find myself having to jump up from my desk quite a bit, and it’s nice to be able to just pick up my phone without first unplugging it. And I imagine all of that plugging and unplugging is reducing the durability of the port over time.
I really like the magnetic charging port plug adaptors for situations like that, but personally, if I’m jumping up and down from my desk at work or something and have my phone plugged in, I’ll just leave it on my desk while I’m away. And if I’m not coming back to it for a good bit, the extra half second it takes to unplug my phone is more than worth the more efficient power transfer, imo.
But to each their own.
Each to their own indeed!
Couldn’t disagree more. Wireless charging with magnetic attachment like magsafe is a godsend for using my phone as a GPS. Just slap it onto it’s magnetic wireless charger and go. Pull it off when done. A million times better than the old chargers that grip the phone and then also having to plug it in every time I need to drive somewhere, then undo it all when I get there.
Jesus Christ
I interested in how your hate for wireless charging has anything to do with this thread?
We’ve had wireless charging in every single material back and it’s absolutely wonderful QOL improvement.
It can’t be done through metal backs, for what it’s worth.
WTF? Just don’t use wireless charging ffs. What a dumb opinion.
Considering it comes at the cost of your phone being more fragile, the argument is not without merit
And the extra costs to support a feature I never use.
What does wireless charging has to do with phones being more fragile?
Plastic also works, and is far more durable
Phone manufacturers: “Man this glass stuff likes to shatter a lot no matter what we try to make it stronger. I know, let’s wrap the whole phone in it that’ll solve everything!!! 111”
We had phones with glass backs before wireless charging was widespread (see sony xperia z phones from 8+ years ago for example)
The LG G5 solved the problem in 2016.
The LG G5 solved the problem in 2016.
Manufacturers may use it as a scapegoat, but it won’t be the reason
right to repair LETS GOOO
Thank you, Mr. EU
One of the few areas where I favor a “One-world” standard.
AA it is!
Here’s hope to standardized USB-C connector charging will also happen outside of Europe for the rest of the world.
For companies like Apple, it would be cost more to keep two types of ports for different regions rather than upgrade the new devices all together. Been holding out with my broken iPhone 12 waiting for that sweet USB-C
This is awesome. Thank god for EU legislation that directly benefits me as an American consumer. Now I can microwave lithium ion batteries in peace!
Wonder if phone manufacturers will fragment their offerings to satisfy EU requirements or if we’ll all end up with removable batteries.
It will be a pretty major redesign of the chasis and body to accommodate a removable battery and the cover, so I think it would make little economical sense to maintain two designs for every phone sold here.
I’m wondering how ‘user replaceable’ is defined. Will we get backs that just pop off, or do they just need to be easier to replace? (No glue or proprietary tools required)
@ClassyDave @Roman0 Let’s hope that it doesn’t happen.
Also it could create a black market for exported/imported European phones.
