• Primarily0617@kbin.social
    link
    fedilink
    arrow-up
    62
    ·
    1 year ago

    4/5 products will be repairable

    the fifth would’ve been, had lenovo not filled it with a bunch of glue for a laugh

    • pastermil@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      As if soldering RAM & SSD isn’t enough, the chasis would be solid epoxy and there’s no way you’re taking out the battery or the keyboard, let alone the mainboard.

  • MinusPi@yiffit.net
    link
    fedilink
    English
    arrow-up
    51
    ·
    1 year ago

    Congratulations, you’re almost doing what you should’ve been doing in the first place.

  • HidingCat@kbin.social
    link
    fedilink
    arrow-up
    27
    ·
    1 year ago

    I mean, given they sell Thinkpads, the bar is likely to be easier to reach for them. I do wonder by what metric of “repairable” they mean. The quote has him saying batteries and SSDs, but those are already fixable in most of their existing line up. It’s the RAM (so many are soldered, even in the Thinkpad line) I’m mostly thinking about, and there’s also the screen and keyboard, two other common failure points.

      • erwan@lemmy.ml
        link
        fedilink
        English
        arrow-up
        23
        ·
        1 year ago

        I’ve never heard of RAM disconnecting in the laptop. They’re clipped so I don’t see how that could happen.

        • circuscritic@lemmy.ca
          link
          fedilink
          English
          arrow-up
          18
          ·
          1 year ago

          Really? My RAM is always falling out. I can’t even chuck my laptop over the fence and cushion it’s landing on my trampoline without my RAM just falling out. Fucking shoddy.

        • OneOrTheOtherDontAskMe@lemmy.world
          link
          fedilink
          English
          arrow-up
          8
          ·
          1 year ago

          Yeah I think I’d shake the fans out of the thing before I’d be able to unseat a stick of RAM. My theory is that anyone who unseat it without opening it had a bad clip

      • HidingCat@kbin.social
        link
        fedilink
        arrow-up
        5
        ·
        1 year ago

        What? That is one of the crazier takes I’ve seen. RAM upgradibility is so much better, never heard of RAM disconnecting.

  • Aeonx21@lemmy.world
    link
    fedilink
    English
    arrow-up
    22
    ·
    1 year ago

    I’m only here to say, why the fuck would you put wrenches in this pic? Imo Should be screw drivers

  • ShaggySnacks@lemmy.myserv.one
    link
    fedilink
    English
    arrow-up
    19
    ·
    1 year ago

    “By repairable we mean that you have to us a monthly subscription to get access to the tools needed or you can take it one of your very expensive authorized repair centers. We can’t lose money because you decided to repair our products.”

    • rambaroo@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Idk, Lenovo’s laptops have always been fairly easy to work on. The back panel on my legion is a little tough to get off but everything is easily accessible once it’s removed. There was even an extra slot for an nvme drive so I have two hard drives now.

  • TheMurphy@lemmy.world
    link
    fedilink
    English
    arrow-up
    15
    ·
    1 year ago

    Well, yeah. They kinda have to by EU law in the future. But good to see they start the change now.

  • somenonewho@feddit.de
    link
    fedilink
    English
    arrow-up
    10
    ·
    1 year ago

    I love ThinkPads especially the “good old” ones. Especially for their accessibility of parts and easy repair/upgradability.

    My personal laptop has been a Thinkpad since 2013 (Thinkpad Edge E135 > Thinkpad X220 > Thinkpad x260) and at work we are also given ThinkPads (currently running a T14 gen 3).

    Most ThinkPads I encountered are also sturdy built and not Gleis together or some crap like that. However I recently had an issue with my x260’s power button no longer working and to get it to work I had to replace the top bezels. Well maybe to put it more bluntly I had to get a replacemt bezel and put my Thinkpad into it since to replace the bezel I had to take out almost everything and then put it back in the reverse order. The mere fact that I managed to do it and there are officiall step by step instructions on how to (hmm) are a big upside of ThinkPads. But like others have said it used to be even better.

    Well long story short: I’ve recently preordered a framework 13 amd while I honestly would have preferred a “Thinkpad black” Chassis framework just seems to have the right idea to me.

    • Danny M@lemmy.escapebigtech.info
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      Framework is doing amazing work. Sure, their stuff isn’t cheap, but you’re basically voting with your wallet against the throwaway tech culture. It’s like saying, “Hey, we’d rather pay a bit more for gear that’s actually built to last, than for some flimsy junk that falls apart and costs a fortune to fix.”

  • olicvb@lemmy.ca
    link
    fedilink
    English
    arrow-up
    10
    arrow-down
    1
    ·
    1 year ago

    They better be repairable, 2-3 in 10 of them will need it out of the box. smh Lenovo i used to have better expectations of you.

    For the curious: My work has us get batches of them, some have camera issues, others simply don’t turn on.

    • nameisnotimportant@lemmy.ml
      link
      fedilink
      English
      arrow-up
      6
      ·
      1 year ago

      I’m a bit surprised by this, looking at common recommandations for PC laptops Lenovo is mentioned 90% of the time then alternative manufacturers like frame.work. What would be your recommandation then?

      • EyesInTheBoat@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        1 year ago

        Probably framework. I think they are reading the writing on the wall with all of the Thinkpad fans I know either having purchased one or on preorder for the new ones.

        • nameisnotimportant@lemmy.ml
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Thanks, I seriously considered getting one but their supply is still limited and I can’t get one in my country :/

          • EyesInTheBoat@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            Yeah, they’re still on backorder since everyone (understandably) lost their minds when they dropped the current gen models. Should be cleared up by early next year.

      • olicvb@lemmy.ca
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        mmh imo all the main manifacturers cheaps us out in the laptop category (unless you go into the expensive side i guess). There’s always some compromise somewhere :/

        But to be fair, i’m not some reviewer and haven’t seen all that the land of laptops has to offer. My advice would be to go looking at different youtube reviews on different channels too.

        In my experience:

        Microsoft devices while not too good on repairability (hard to open) are often solid and reliable, they tend to be able to keep up with the time. Ex: my surface pro 4 is still used and is surprisingly keeping up. I’d say the same on the surface laptop side. They are more work oriented and less for gaming sadly.

        Asus has a nice gaming oriented catalog, but they feel cheap material wise. I’ve got the ROG Flow Z13 tablet and it’s amazing the amount of power they managed to put in there, the casing is all metal so my previous statement doesn’t apply to this one, but the screen is plastic(?) and has some damage already. I’ve use a Strix laptop a few times and that’s where i found the quality lacking.

        I used to think HP was a brand to avoid, but with the ones we ship out, they seem to be decent. I have yet to use it.

        I had an Acer aspire that had a pentium in it, probably got it around 2008-10. Used to game on it until it overheated itself off, and rinse repeat many times. Great laptop for everyday use, suprisingly still running to this day. I’d recommend for people who dont want to get a chromebook, as some form of step up.

        I’ve no experience with other brands.

        • rambaroo@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Every time I’ve tried Acer or Asus I’ve had a deal breaker hardware issue immediately. I see people recommending them a lot but they must have QC consistency issues of some kind. Maybe I just had bad luck, but I always end up going back to Lenovo and I never have issues.

        • space@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          In my experience, HP machines are very good. At work we switched to Dells, and I absolutely hate them. I’ve encountered a lot of problems, bad drivers, puffed up battery, stupid Dell software (like the piece of shit WavesMax that comes with the audio driver and needs to run in the background, otherwise it won’t switch from speakers to headphones when you plug them in; it also applies shitty audio effects on every every audio device. If you turn it off and switch the playback device, it turns back on).

  • FireWire400@lemmy.world
    link
    fedilink
    English
    arrow-up
    9
    ·
    edit-2
    1 year ago

    ThinkPads once were pretty easy to work on and repair, but then the whole soldering stuff to the system board and removing power bridge batteries happened.

    If you look at something like a T430, it has access doors for everything on the bottom in addition to being built like a tank.

  • Aurenkin@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    8
    ·
    1 year ago

    I like to think that this means you take your device to a repair centre and they have you spin a big wheel to see if you get to have your device repaired.

  • pastermil@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    7
    ·
    1 year ago

    I took apart a Thinkpad *20 series laptop including the main board and put it back together with not a single issue. I heard thingd went downhill from the *40 series onward and became unbearable for the Thinkpad enthusiasts since the *90 series.

    Now they’re saying this like they haven’t fucked it up in the first place. What a joke.

  • MrSnowy@lemmy.ml
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    But they aren’t repairable now because you keep setting your fucking wrenches on top of them