I’m sure I’m massively overthinking this, but any help would be greatly appreciated.

I have a domain name that I bought through NameCheap and I’ve pointed it to Cloudflare (i.e. updated the name servers). I have a Synology NAS on which I run Docker and a few containers. Up until now I’ve done this using IP addresses and ports to access everything (I have a Homepage container running and just link to everything from there).

But I want to setup SSL and start running Vaultwarden, hence purchasing a domain name to make it all easier.

I tried creating an A record in Cloudflare to point to the internal IP of my NAS (and obviously, this couldn’t be orange-clouded through CF because it’s internal to my LAN). I’m very reluctant to point the A record to the external IP of my NAS (which, for added headache is dynamic, so I’d need to get some kind of DDNS) because I don’t want to expose everything on my NAS to the Internet. In actual fact, I’m not precious about accessing any of this stuff over the internet - if I need remote access I have a Tailscale container running that I can connect to (more on that later in the post). The domain name was purely for ease of setting up SSL and Vaultwarden.

So I guess my questions are:

  • What is the best way to go about this - do I create a DDNS on the NAS and point that external IP address to my domain in Cloudflare, then use Traefik to just expose the containers I want to have access to using subdomains?
  • If so, then how do I know that all other ports aren’t accessible (I assume because I’m only going to expose ports 80 and 443 in Traefik?)
  • What do other people see (i.e. outside my network) if they go to my domain? How do I ensure they can’t access my NAS and see some kind of page?
  • Is there a benefit to using Cloudflare?
  • How would Pi-hole and local DNS fit into this? I guess I could point my router at Pi-hole for DNS and create my A records on Pi-hole for all my subdomains - but what do I need to setup initially in Cloudflare?
  • I also have a RPi that has a (very basic) website on it - how do I setup an A record to have Cloudflare point a sub-domain to the Pi’s IP address?
  • Going back to the Tailscale thing - is it possible to point the domain to the IP address of the Tailscale container, so that the domain is only accessible when I switch on the Tailscale VPN? Is this a good idea/bad idea? Is there a better way to do it?

I’m sure these are all noob-type questions, but for the past 6-7 years I’ve purely used this internally using IP:port combinations, so never had to worry about domain names and external exposure, etc.

Many thanks in advance!

  • MangoPenguin@lemmy.blahaj.zone
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    How would Pi-hole and local DNS fit into this?

    Pihole/local DNS would resolve all your queries when on your local network. So you would add the A/CNAME records for your services there with local IPs.

    but what do I need to setup initially in Cloudflare?

    Nothing if you just want local usage of the domain name, queries never hit cloudflare. But you do want the domain at least added to cloudflare so you can issue SSL certs using letsencrypt and its DNS-01 challenge.

    What do other people see (i.e. outside my network) if they go to my domain? How do I ensure they can’t access my NAS and see some kind of page?

    If you don’t open ports on your firewall they wouldn’t have any access. Otherwise if you do open the web ports, they generally go to a reverse proxy running somewhere that routes traffic as needed, so you could choose to display some kind of page or just show nothing.

    I also have a RPi that has a (very basic) website on it - how do I setup an A record to have Cloudflare point a sub-domain to the Pi’s IP address?

    You would need a reverse proxy running either on the Pi or on the NAS that cloudflare points to, then that proxy takes the subdomain and routes it to the appropriate internal IP/service.

    • schmurnan@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Thanks. There’s definitely stuff in here I want to do, I just need to figure out the order of play and break it down a bit.

      As per reply to another comment.

      Do I have to port forward 80 and 443 no matter what? Ideally I don’t want to forward anything.

      Do I need DDNS in here somewhere, i.e. create a DDNS and link it to my NAS, create an A record in Cloudflare to point my domain to the external IP of the DDNS? Is that how I get into my NAS from the domain without worrying about the IP changing? How do I then prevent anybody accessing the NAS admin on port 5000/5001, as well as anything else except the containers I expose via Traefik?

      • MangoPenguin@lemmy.blahaj.zone
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Do I have to port forward 80 and 443 no matter what? Ideally I don’t want to forward anything.

        You only need to port forward if you want external access without using a VPN or something like that. Like if you wanted friends to be able to access your server for example.

        Do I need DDNS in here somewhere, i.e. create a DDNS and link it to my NAS, create an A record in Cloudflare to point my domain to the external IP of the DDNS?

        Yes, but only if you want to port forward and have external access. If you want local access only then you don’t need port forwarding, DDNS, or any A records in cloudflare.

        How do I then prevent anybody accessing the NAS admin on port 5000/5001, as well as anything else except the containers I expose via Traefik?

        Assuming you did port forward 80/443, then the NAS admin wouldn’t be exposed since it’s on different ports.

        • schmurnan@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Thanks. I realise they’re all pretty basic questions. But brace yourself: more are on their way!

          So… no, I don’t want to give external access - I’m not running any services that anyone would want/need access to - other than perhaps my Jellyfin server, but not sure I even want anyone accessing that. So let’s assume for right now, no access to the outside world. Therefore, no port forwarding required.

          So to get access to my internal network from the domain, do I simply setup local DNS records in something like Pi-hole, to point mydomain.com to the internal IP or my NAS? Kind of like a network-wide equivalent of modding the /etc/hosts file on my machine?

          Perhaps a(nother) silly question but, what’s to stop me doing that now with a completely random domain name? Is there some kind of authentication I’d need to go through to prove that mydomain.com is, in fact, mine? Or does it simply not matter since it’s internal only?

          If I’ve understood correctly, then, I don’t need Cloudflare at all in my setup if there’s no external access? Nothing to proxy, nothing to protect?

          Assuming I get all of the above working and traffic routing to my containers, how would I then go about setting up SSL? Can that be done through Traefik rather than Cloudflare? Even if the domain isn’t external?

          • MangoPenguin@lemmy.blahaj.zone
            link
            fedilink
            English
            arrow-up
            2
            ·
            edit-2
            1 year ago

            do I simply setup local DNS records in something like Pi-hole, to point mydomain.com to the internal IP or my NAS? Kind of like a network-wide equivalent of modding the /etc/hosts file on my machine?

            Yep exactly!

            Perhaps a(nother) silly question but, what’s to stop me doing that now with a completely random domain name?

            Nothing, it’s local to your network only so it only affects you. You could set google.com to return whatever IP you want for example, but it would prevent you from actually accessing google.

            If I’ve understood correctly, then, I don’t need Cloudflare at all in my setup if there’s no external access? Nothing to proxy, nothing to protect?

            The only thing you need Cloudflare (or another DNS-01 supported service) for, is getting letsencrypt SSL certificates. Since it uses automatically generated public DNS records on your domain name to verify that you own it.

            Can that be done through Traefik rather than Cloudflare? Even if the domain isn’t external?

            Yep it’s done through Traefik either way, their docs should have a section on SSL with cloudflare IIRC.

            • schmurnan@lemmy.worldOP
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              Absolute superstar, thanks for your help so far. I’ll make a start on some of this tomorrow and see how far I get — either with Traefik or NPM.

              Do I need to do anything with the domain itself on Cloudflare at the moment? Or do I just leave it with its current A record pointing at an IP address (it was done as part of the setup in Cloudflare so I have no idea what that IP address is).

              Obviously that domain in reality will just sit there doing nothing.

                • schmurnan@lemmy.worldOP
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  1 year ago

                  OK so made a start with this. Spun up a Pi-hole container, added mydomain.com as an A record in Local DNS, and created a CNAME for traefik.mydomain.com to point to mydomain.com.

                  In Cloudflare, I removed the mydomain.com A record and the www CNAME record.

                  Doing an nslookup on mydomain.com I get

                  Non-authoritative answer:
                  *** Can't find mydomain.com: No answer
                  

                  Which I guess is to be expected.

                  However, when I then navigate to http://traefik.mydomain.com in my browser, I’m met with a Cloudflare error page: https://imgur.com/XhKOywo.

                  Below is the docker-compose of my traefik container:

                  traefik:
                      container_name: traefik
                      image: traefik:latest
                      restart: unless-stopped
                      networks:
                        - medianet
                      ports:
                        - 80:80
                        - 443:443
                      expose:
                        - 8080
                      volumes:
                        - /etc/localtime:/etc/localtime:ro
                        - /var/run/docker.sock:/var/run/docker.sock:ro
                        - /volume1/docker/traefik:/etc/traefik
                        - /volume1/docker/traefik/access.log:/logs/access.log
                        - /volume1/docker/traefik/traefik.log:/logs/traefik.log
                        - /volume1/docker/traefik/acme/acme.json:/acme.json
                      environment:
                        - TZ=Europe/London
                      labels:
                        - traefik.enable=true
                        - traefik.http.routers.traefik.rule=Host(`$TRAEFIK_DASHBOARD_HOST`) && (PathPrefix(`/api`) || PathPrefix(`/dashboard`))
                        - traefik.http.routers.traefik.service=api@internal
                        - traefik.http.routers.traefik.entrypoints=traefik
                  

                  My traefik.yml is also nice and basic at this point:

                  global:
                    sendAnonymousUsage: false
                  
                  entryPoints:
                    web:
                      address: ":80"
                    traefik:
                      address: "8080"
                  
                  api:
                    dashboard: true
                    insecure: true
                  
                  providers:
                    docker:
                      endpoint: "unix:///var/run/docker.sock"
                      watch: true
                      exposedByDefault: false
                  
                  log:
                    filePath: traefik.log
                    level: DEBUG
                  
                  accessLog:
                    filePath: access.log
                    bufferingSize: 100
                  

                  Any ideas what’s going wrong? I’m unclear on why the domain is still routing to Cloudflare.